企业官网建设流程全解析

郑州做网站好,网页定做,软件技术主要课程,网站开发测量像素工具20251224给飞凌OK3588-C开发板适配Rockchip原厂的Buildroot【linux-6.1】系统时确认ssh服务【内置dropbear】 2025/12/24 10:25缘起#xff1a;给飞凌OK3588-C开发板适配Rockchip原厂的Buildroot【linux-6.1】后#xff0c;需要配置ssh。 驱动调试的时候DEBUG口就足够了。最多…20251224给飞凌OK3588-C开发板适配Rockchip原厂的Buildroot【linux-6.1】系统时确认ssh服务【内置dropbear】2025/12/24 10:25缘起给飞凌OK3588-C开发板适配Rockchip原厂的Buildroot【linux-6.1】后需要配置ssh。驱动调试的时候DEBUG口就足够了。最多再打开一个USB接口的adb功能。【有些时候需要多一个口^_】但是产品给客户暴露的借口就是TF卡的卡槽和以太网接口了【应用工程师需要的ssh功能】想实测一下TF卡的读写速度。4线USB2.0通过adb直接拿到电脑上的速度是31.3 MB/s写入TF卡的速度略微低于31.3 MB/s【大概为25.56MB/s】需要实测开发板丝印ETH1芯片RTL8211F-CG的网速。通过ifconfig确认为eth0。需要使用ov5645的驱动框架来适配LVDS接口的105机芯。按照以前的经验首先关闭I2C的读写结果肯定会出现某些地方遗漏的只能通过编译器来检查问题了当你把荣品RD-RK3588开发板重新适配一把就相当于从头做了一个项目【荣品RD-RK3588开发板】。当然开发板的功能都是好的你免除了调试的过程也就没有解决相关硬件出错的经验/机会了1、都去找DeepSeek咨询配置openSSH的方法了没有想到 Rockchip原厂的Buildroot【linux-6.1】系统 默认集成轻量级的ssh服务器dropbear。could not load cursor dnd-movecould not load cursor dnd-copycould not load cursor dnd-nonecould not load cursor dnd-movecould not load cursor dnd-copycould not load cursor dnd-noneFontconfig error: No writable cache directoriesECDSA ED25519Starting sshd: OKxkbcommon: ERROR: couldnt find a Compose file for locale en_US.UTF-8 (mapped to en_US.UTF-8)could not create XKB compose table for locale en_US.UTF-8. Disabiling composeStarting dnsmasq: OKxkbcommon: ERROR: couldnt find a Compose file for locale en_US.UTF-8 (mapped to en_US.UTF-8)could not create XKB compose table for locale en_US.UTF-8. Disabiling composefstrim: Starting fstrim process (711)...Starting input-event-daemon: donerootrk3588-buildroot:/# [ 5.463394] dwhdmi-rockchip fde80000.hdmi: use tmds mode[ 5.469567] dwhdmi-rockchip fde80000.hdmi: use tmds mode[ 5.476658] file system registered[ 5.529174] read descriptors[ 5.529216] read strings[ 5.776551] dwc3 fc000000.usb: device reset[ 5.864751] android_work: sent uevent USB_STATECONNECTED[ 5.957856] android_work: sent uevent USB_STATECONFIGURED[ 6.026593] fdee0000.hdmirx-controller: Vertical Sync threshold reached interrupt 0x2[ 6.137602] fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing signal lock ok, i:154![ 6.476174] Freeing drm_logo memory: 1384K[ 6.539979] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_delayed_work_audio: enable audio[ 6.753920] fdee0000.hdmirx-controller: hdmirx_format_change: New format: 3840x2160p29.96 (4400x2250)[ 9.434890] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 1[ 9.530178] fdee0000.hdmirx-controller: Vertical Sync threshold reached interrupt 0x2[ 9.604932] fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing signal lock ok, i:23![ 9.611961] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_delayed_work_audio: enable audio[ 10.223434] fdee0000.hdmirx-controller: hdmirx_format_change: New format: 3840x2160p29.96 (4400x2250)[ 10.861291] RTL8211F Gigabit Ethernet stmmac-1:02: Downshift occurred from negotiated speed 1Gbps to actual speed 100Mbps, check cabling![ 10.862965] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off[ 10.863012] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyrootrk3588-buildroot:/#rootrk3588-buildroot:/# [ 15.629864] platform dp0-sound: deferred probe pending[ 15.629899] platform es8388-sound: deferred probe pending[ 15.629911] platform wireless-bluetooth: deferred probe pending[ 15.629921] platform mtd_vendor_storage: deferred probe pending[ 15.629931] platform sdio-pwrseq: deferred probe pendingrootrk3588-buildroot:/#rootrk3588-buildroot:/# ifconfigeth0 Link encap:Ethernet HWaddr 22:B9:8E:85:92:2Einet addr:192.168.3.43 Bcast:192.168.3.255 Mask:255.255.255.0inet6 addr: fe80::98b6:c107:6baa:c98b/64 Scope:LinkUP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1RX packets:431 errors:0 dropped:1 overruns:0 frame:0TX packets:35 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:66767 (65.2 KiB) TX bytes:3414 (3.3 KiB)Interrupt:68lo Link encap:Local Loopbackinet addr:127.0.0.1 Mask:255.0.0.0inet6 addr: ::1/128 Scope:HostUP LOOPBACK RUNNING MTU:65536 Metric:1RX packets:8 errors:0 dropped:0 overruns:0 frame:0TX packets:8 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:576 (576.0 B) TX bytes:576 (576.0 B)rootrk3588-buildroot:/#2、通过winSCP链接飞凌OK3588-C开发板必须配置/设置密码Microsoft Windows [版本 10.0.19045.6456](c) Microsoft Corporation。保留所有权利。C:\Users\QQping 192.168.3.43正在 Ping 192.168.3.43 具有 32 字节的数据:来自 192.168.3.43 的回复: 字节32 时间1ms TTL64来自 192.168.3.43 的回复: 字节32 时间1ms TTL64来自 192.168.3.43 的回复: 字节32 时间1ms TTL64来自 192.168.3.43 的回复: 字节32 时间1ms TTL64192.168.3.43 的 Ping 统计信息:数据包: 已发送 4已接收 4丢失 0 (0% 丢失)往返行程的估计时间(以毫秒为单位):最短 0ms最长 0ms平均 0msC:\Users\QQrootrk3588-buildroot:/#rootrk3588-buildroot:/#rootrk3588-buildroot:/# ps -e | grep sshrootrk3588-buildroot:/# ps -e | grep SSHrootrk3588-buildroot:/#rootrk3588-buildroot:/# ps -e | grep dropbear650 ? 00:00:00 dropbearrootrk3588-buildroot:/#rootrk3588-buildroot:/#rootrk3588-buildroot:/# passwdChanging password for rootNew password:Bad password: too shortRetype password:passwd: password for root changed by rootrootrk3588-buildroot:/#rootrk3588-buildroot:/#就算你设置密码了winSCP也是链接不进来的。必须退出winSCP之后再次链接了^_3、SSH链接Xshell 8 (Build 0087)Copyright (c) 2024 NetSarang Computer, Inc. All rights reserved.Type help to learn how to use Xshell prompt.[C:\~]$Connecting to 192.168.3.43:22...Connection established.To escape to local shell, press CtrlAlt].WARNING! The remote SSH server rejected X11 forwarding request.rootrk3588-buildroot:~#rootrk3588-buildroot:~# lltotal 8drwx------ 2 root root 4096 Jul 18 12:30 ./drwxr-xr-x 20 root root 4096 Jan 1 1970 ../rootrk3588-buildroot:~#rootrk3588-buildroot:~# cd ..rootrk3588-buildroot:/#rootrk3588-buildroot:/# lltotal 76drwxr-xr-x 20 root root 4096 Jan 1 1970 ./drwxr-xr-x 20 root root 4096 Jan 1 1970 ../-rw-r--r-- 1 root root 0 Jan 1 1970 .resized-rw-r--r-- 1 root root 0 Jul 18 12:30 .skip_fscklrwxrwxrwx 1 root root 7 Dec 23 13:17 bin - usr/bin/-rw-r--r-- 1 root root 489 Jul 18 12:30 busybox.fragmentlrwxrwxrwx 1 root root 8 Dec 24 01:35 data - userdata/drwxr-xr-x 14 root root 3920 Jan 1 1970 dev/drwxr-xr-x 26 root root 4096 Dec 24 02:32 etc/drwxr-xr-x 2 root root 4096 Dec 24 01:35 info/lrwxrwxrwx 1 root root 7 Dec 23 13:17 lib - usr/lib/lrwxrwxrwx 1 root root 3 Dec 23 13:17 lib64 - lib/lrwxrwxrwx 1 root root 11 Dec 23 13:26 linuxrc - bin/busybox*drwx------ 2 root root 16384 Dec 24 01:36 lostfound/drwxr-xr-x 11 root root 4096 Dec 23 13:36 media/drwxr-xr-x 5 root root 4096 Dec 24 01:35 mnt/drwxr-xr-x 3 root root 4096 Jan 1 1970 oem/drwxr-xr-x 3 root root 4096 Dec 23 13:36 opt/dr-xr-xr-x 257 root root 0 Jan 1 1970 proc/drwxr-xr-x 17 root root 4096 Dec 24 01:35 rockchip-test/drwx------ 2 root root 4096 Jul 18 12:30 root/drwxr-xr-x 11 root root 540 Jan 1 1970 run/lrwxrwxrwx 1 root root 8 Dec 23 13:17 sbin - usr/sbin/lrwxrwxrwx 1 root root 10 Dec 24 01:35 sdcard - mnt/sdcard/dr-xr-xr-x 14 root root 0 Jan 1 1970 sys/drwxr-xr-x 3 root root 4096 Dec 24 01:35 system/drwxrwxrwt 5 root root 180 Jan 1 1970 tmp/lrwxrwxrwx 1 root root 9 Dec 24 01:35 udisk - mnt/udisk/drwxr-xr-x 4 root root 4096 Jan 1 1970 userdata/drwxr-xr-x 7 root root 4096 Dec 24 01:35 usr/drwxr-xr-x 7 root root 4096 Dec 24 01:36 var/lrwxrwxrwx 1 root root 6 Dec 24 01:35 vendor - system/rootrk3588-buildroot:/#rootrk3588-buildroot:/#Microsoft Windows [版本 10.0.19045.6456](c) Microsoft Corporation。保留所有权利。C:\Users\QQssh root192.168.3.43The authenticity of host 192.168.3.43 (192.168.3.43) cant be established.ED25519 key fingerprint is SHA256:KggU8HHUF9M/sjbc4EnvOK1SxyPc6AYXzAUmXcrZFvA.This key is not known by any other names.Are you sure you want to continue connecting (yes/no/[fingerprint])? yesWarning: Permanently added 192.168.3.43 (ED25519) to the list of known hosts.root192.168.3.43s password:rootrk3588-buildroot:~#rootrk3588-buildroot:~# lltotal 8drwx------ 2 root root 4096 Jul 18 12:30 ./drwxr-xr-x 21 root root 4096 Dec 24 02:47 ../rootrk3588-buildroot:~#rootrk3588-buildroot:~#rootrk3588-buildroot:~#4、DeepSeekhttps://chat.deepseek.com/a/chat/s/e069b200-bd37-4be9-aeae-723aa7ac94ddRK3588 Buildroot SSH配置指南RK3588的buildroot默认自带SSH服务器吗用户名密码2. 如果需要SSH支持推荐配置方法一使用Dropbear轻量级bash# 选择 DropbearTarget packages → Networking applications → dropbear# 可能需要启用以下选项# - Install dropbear website keys# - Enable scp方法二使用OpenSSH功能完整bashTarget packages → Networking applications → openssh密码设置方式首次启动后设置bash# 通过串口登录后设置passwd